Tachymeter: What Is It and How Do You Use It
No doubt you’ve seen a tachymeter scale on a watch. Probably on a chronograph. You can also find it on some time-only watches, but without the chronograph complication, it’s completely useless. This article explains what a tachymeter is and how you can use it.
What is it and what is it for
A tachymeter is a scale for measuring the speed/output/rate. It depends on what you’re using it for. Mainly, it’s for measuring the average speed over a fixed distance (a kilometer or a mile).
This only works for times of below one minute. If it takes more, the hand will point to, say, a nonsensical reading of 500 (kph, mph), unless the scale of your watch doesn’t continue to speeds below 60 units. If the speed isn’t constant, the result will be an average. This might be useful in racing, but that’s about it. And even there, it’s more of a trivia.
Anyway, all in all, it allows you to quickly get the rate of something within a measurable fixed range.
Just the speed? And in what units?
While the scale was often marked as miles per hour or kilometers per hour, it’s versatile. You won’t see the speed unit displayed on, say, a Rolex Daytona or an Omega Speedmaster.
Rolex will give you a diplomatic “units per hour” description, which means “whatever.” Omega won’t give you that, so you get to figure out that it means “whatever units you wish to use.”
Omega’s adverts for the CK 2915 referred to it as a “tachymeter/productometer” and claimed that it had some uses in sports, industry, and science. Technically, that’s true. The base doesn’t need to be a distance. It could be a number of a different nature. Do you want the efficiency rate of a production line? Use the tachymeter, and there you go.
Any practical uses?
In fact, yes. OK, it’s a bit of a case study, although one of the “it could happen” kind.
Let’s say you’ve observed that while driving, the speed gauge shows you that you’re going at 100 km/h. But for whatever reason, the view in the windows seems to roll by faster than that. So, you don’t trust the speed gauge on the vehicle, and you want to check it.
Mark the starting and ending point of a mile or a kilometer, have the vehicle approach it at a constant speed, start the chronograph when it crosses the starting line, stop it when it passes the finish, and the chrono hand should display its speed on the tachymeter scale.
Is it accurate?
Don’t count on too precise a measurement. Of course, the result has some inaccuracy to it.
The higher the speed, the greater that inaccuracy will be. After all, if you do that at 200 kph, the point at which you’ve started and stopped the chrono might be far off from the actual moment that the vehicle crossed either line of the marked distance. This has to do with the reaction time.
So, you can’t use it to calibrate a speedometer, but you can use it to check if it needs to be calibrated, repaired, or both.
Stop the physics talk
OK, OK. I don’t like talking physics either. If you wondered if you’ll ever need the tachymeter, the answer is short and sweet. You likely won’t.
The example of a gauge that’s possibly broken is the only practical application that the tachy scale might have these days. Using it won’t save you time. But it just might save you from spending on a mechanic. That’s because you can use it to prove or disprove your suspicions.
All in all
In today’s society, the tachymeter doesn’t have much use. It’s an essential part of the design of some watches though, and let’s be honest. It just looks cool.
Have you ever had any practical use for the tachymeter scale on a watch? Let me know in the comments.